F You valvE
Kind of. Valve Corporation known to the world for creating Steam, has recently stuck their heads into a pile of shit. Just a few days ago Valve decided to reboot their most popular game Counter-Strike, but they did it in a way that royally pissed everyone off. They not only removed ALL of the stuff […]
Pirating iDRAC7
This is a short little post on how to activate iDRAC7 enterprise on Dell PowerEdge R#20/T#20 servers To start you need to download a 10-year-old version of OMSA (OpenManage Server Administrator) It is hard to find as it’s no longer supported but here is a working archive.org link, I have also mirrored it. You can […]
Install Dell iSM On Linux
This is a “Guide” for installing Dell iDRAC Service Module. This works both on Debian 11 (Bullseye) and Ubuntu 22.04 (Jammy) For Ubuntu 22.04 For Debian 11 For any older versions please look at the OpenManage Repo
VM with high I/O times?
Proxmox VM being a tad bit slow? A bit stinky at times, If you’re using SSDs in your zPool and seeing I/O spikes in the seconds well I had this problem too. With some super deep diving into the Proxmox forum, I found I few key things, it could be your CPU model type, by […]
Developer mode is disabled by system policy
This sucks but the easiest way to disable this P.O.S feature is to log in to the system with an account not tethered to the school or workplace. Use an email that isn’t in the Gsuite. Then follow the steps to enable developer mode. Follow this guide for more.
cd9660:iso9660/TRUENAS failed with error 2.
I got this error when trying to set up my new NAS. How do you fix it? Well, I tried the installation with 2 different 32GB USB drives and the same thing happened, but I read on the TrueNAS forum that a new 16GB drive worked for this person. So I went and the next […]
How to change Proxmox node name.
I know that there are a lot of tutorials on how to do this but not any that are easy at first sight. Let’s get right into it Open up your servers shell environment and do the below Credit to Apmuthu on the Proxmox Forum Hope this helps!
“kex_exchange_identification: Connection reset by peer” The Fix.
If you have received this error when trying to ssh into your server here is how to fix it. To do this you will need access to your server’s terminal in some way. Run the following command sudo nano /etc/hosts.deny do not run this as root as it will not work you should see the […]
